Banjo Corporation fertilizer fittings are known for their exceptional chemical and corrosion resistance. Made with glass-reinforced polypropylene, these fittings are lightweight, have low absorption, and are impact resistant. This combination makes Banjo fittings, valves, and couplings the best choice for fertilizer application.
Unfamiliar with Banjo Corp. Fittings? Here’s what makes Banjo superior.
Product is important, but the safety of your workers is essential. With Dry-Mate Dry-Disconnects, leakage from disconnecting is minuscule compared to standard valves. When properly installed and operated, the danger of harmful chemicals contacting your workers is significantly reduced.
DITCH THE MAINTENANCE
All that spillage has to go somewhere. If you are collecting large areas of spillage run-off, you have to have it pumped out. Reduce your maintenance costs on your spillage pits by keeping fluids contained.
EVERY DROP COUNTS
Your product is money. Why waste money on spilling your product every time you disconnect? With Dry-Mate, your spillage
amount will be significantly reduced. At 3 mL product spillage for a 2″ line, you can have peace of mind that your product is
being placed where it should be and not on the ground.
PRODUCT ONLY WHERE YOU WANT IT
When a Dry-Mate is properly installed and operated, the assembly will not accidentally separate while fluid is flowing; preventing costly mishaps.
GET RIGHT TO THE SOURCE
With Banjo manifold flange connections, the days of spending hours unhooking entire systems of valves and fittings are over. You can directly isolate and replace the problematic part or replumb sections without disassembling the whole system.
SKIP THE TAPE AND SEALANT
Flange connections utilize clamps instead of threads, facilitating quick and easy assembly and disassembly while ensuring a leak-proof system. Threaded pipe needs tape or sealant, and the slightest imperfection in the pipe or seal can cause a leak. With properly installed flange connections, you won’t worry about connection leaks or wait for the sealant to cure.
SAVE TIME. SAVE MONEY.
Time spent unthreading systems and repairing leaks from faulty connections is unproductive and ultimately hits your pocketbook. Banjo’s manifold flange systems get you back in the field and out of the shop in no time.
Due to backording or product delays, an equivalent product from TerreMax may be substituted to keep you on time.